Tube cutter with safety lock suitable with tube diameter max. 12mm. Never cut metals such as electric wires.
The tube cutter makes the hydraulic installation easier. Instead you could also cut tubes on a cutting board with a regular knife. But imagine, how to position the cutting board inside the vehicule. NEVER, NEVER cut tubes by side cutter. The hose will be squeezed. It will leak at a one-touch fitting and weak at barb fitting.
1piece costs 13,90€ incl. 19% vat, plus shipment. Delivery time 13-4 weeks
Please order by e-mail.
Inner diameter | 5 | mm |
Burst pressure at 20°C | 50 | bar |
Min. bend radius | 20 | mm |
Why 8mm tube? High resistance in the suction line causes cavitation and foam in the pump. Therefore, it makes sense to choose a bigger diameter in combination with the low-friction push-in fittings. The return line may also be bigger to reduce the back pressure.
It is reasonable to take the transparent tube for the connection between valve, pump and tank to detect dirt, bubbles or foam.
1m costs 3,40€ incl. 19% vat, plus shipment. Delivery time 1-2 weeks
A tube cap for a 8mm tube. The plug is very useful for testing or analysing the hydraulic, if it is needed to disconnect a tube. Just push the plug on the tube like at an push-in fitting. For loosening just pull at the ring of the plug. It can not be easier.
1piece costs 2,50€ incl. 19% vat, plus shipment. Delivery time 1-2 weeks
Please order by e-mail.
Inner diameter | 4 | mm |
Burst pressure at 20°C | 80 | bar |
Min. bend radius | 24 | mm |
1m costs 2,80€ incl. 19% vat, plus shipment. Delivery time 1-2 weeks
Please order by e-mail.
Inner diameter | 4 | mm |
Burst pressure at 20°C | 50 | bar |
Min. bend radius | 15 | mm |
Why 6mm tube? High resistance in the suction line causes cavitation and foam in the pump. Therefore, it makes sense to choose a bigger diameter in combination with the low-friction push-in fittings. The return line may also be bigger to reduce the back pressure.
It is reasonable to take the transparent tube for the connection between valve, pump and tank to detect dirt, bubbles or foam.
1m costs 2,30€ incl. 19% vat, plus shipment. Delivery time 1-2 weeks
A tube cap for a 6mm tube. The plug is very useful for testing or analysing the hydraulic, if it is needed to disconnect a tube. Just push the plug on the tube like at an push-in fitting. For loosening just pull at the ring of the plug. It can not be easier.
1piece costs 2,20€ incl. 19% vat, plus shipment. Delivery time 1-2 weeks
Please order by e-mail.
Inner diameter | 2,5 | mm |
Burst pressure at 20°C | 80 | bar |
Min. bend radius | 13 | mm |
1m costs 2,60€ incl. 19% vat, plus shipment. Delivery time 1-2 weeks
Please order by e-mail.
Inner diameter | 2,5 | mm |
Burst pressure at 20°C | 50 | bar |
Min. bend radius | 10 | mm |
1m costs 2,10€ incl. 19% vat, plus shipment. Delivery time 1-2 weeks
Please order by e-mail.
Inner diameter | 2,5 | mm |
Burst pressure at 20°C | 50 | bar |
Min. bend radius | 10 | mm |
It is reasonable to take the transparent tube for the connection between valve, pump and tank to detect dirt, bubbles or foam.
1m costs 2,10€ incl. 19% vat, plus shipment. Delivery time 1-2 weeks
Please order by e-mail.
A tube cap for a 4mm tube. The plug is very useful for testing or analysing the hydraulic, if it is needed to disconnect a tube. Just push the plug on the tube like at an push-in fitting. For loosening just pull at the ring of the plug. It can not be easier.
1piece costs 1,90€ incl. 19% vat, plus shipment. Delivery time 1-2 weeks
Please order by e-mail.
Inner diameter | 2,2 | mm |
Burst pressure at 20°C | 28 | bar |
Min. bend radius | 10 | mm |
1m costs 2€ incl. 19% vat, plus shipment. Delivery time 1-2 weeks
Please order by e-mail.
Inner diameter | 1,2 | mm |
Burst pressure at 20°C | 28 | bar |
Min. bend radius | 4 | mm |
1m costs 2€ incl. 19% vat, plus shipment. Delivery time 1-2 weeks
Please order by e-mail.